[Voyage-linux] Internet Sharing

[Navas Abubacker]

Hi,

it does works, thanks for your help, but it i not assigning IP address
automatically, It only works when I set up the client machine connected to
eth0 set manually I guess eth0 needs to be enabled with DHCP, please advice

On Wed, Sep 23, 2009 at 8:45 AM, Kim-man 'Punky' TSE
<punkytse at punknix.com>wrote:

> Hi,
>
> So, The AP connect to Internet?
>
> auto eth0
> iface eth0 inet static
>       address 10.1.20.1
>       netmask 255.255.255.0
>       broadcast 10.1.20.255
>       up nat.sh eth0 ath0 "10.1.20.0/24"
>
>
> You need to setup eth0 and another network (10.1.20.1 /24) and enable NAT,
> assuming ath0 is the outbound wireless connect to AP.  eth0 connects to your
> switch of course.
>
> Regards,
> Punky
>
> Navas Abubacker wrote:
>
>> I have a alix box (alix 1c) with Atheros AR 5413 wireless card,
>> My wireless card is configured as a client and it is connected to an AP,
>> now I want to configure this box to share internet so that other clients can
>> access inernet, is it possible ?
>>
>>       WLAN                LAN
>> AP      =>     Alix 1.C   =>  Network Switch / Hub => Other clients
>> Can you guys please guide me ?
>>
>> --
>> Thanks
>> Navas
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> Voyage-linux mailing list
>> Voyage-linux at list.voyage.hk
>> http://list.voyage.hk/mailman/listinfo/voyage-linux
>>
>>
>
>
> --
> Regards,
> Punky
>
> Voyage Solutions (http://solution.voyage.hk)
> * Embedded Solutions and Systems
>  - Mesh Networking, Captive Portal, IP Surveillance, VoIP/PBX
>  - Network Engineering, Development Platform and Consultation
>
>
>


-- 
Thanks
Navas
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.voyage.hk/pipermail/voyage-linux/attachments/20090924/0e9883c6/attachment-0001.html>