[Voyage-linux] Voyage MPD with kernel/cpu w/o cx8 and cmov

[Andy]

Hi Punky,

I will try the new MPD ISO image later. Here the output of lsusb:

root at voyage:~# lsusb
Bus 001 Device 002: ID 6253:0100 TwinHan Technology Co., Ltd Ir reciver 
f. remote control
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

root at voyage:~# lsusb -v   (I removed the "Linux Foundation 1.1 root 
hub" output)

Bus 001 Device 002: ID 6253:0100 TwinHan Technology Co., Ltd Ir reciver 
f. remote control
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         8
  idVendor           0x6253 TwinHan Technology Co., Ltd
  idProduct          0x0100 Ir reciver f. remote control
  bcdDevice            1.00
  iManufacturer           1 Twinhan Tech
  iProduct                2 Remote Control
  iSerial                 3 1111111
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           59
    bNumInterfaces          2
    bConfigurationValue     1
    iConfiguration          4 USB Remote Control
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      1 Boot Interface Subclass
      bInterfaceProtocol      1 Keyboard
      iInterface              0
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.10
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength      63
         Report Descriptors:
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval              10
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      1 Boot Interface Subclass
      bInterfaceProtocol      2 Mouse
      iInterface              0
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.10
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength      52
         Report Descriptors:
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              10
Device Status:     0x0002
  (Bus Powered)
  Remote Wakeup Enabled


Kind regards and many thanks for the great support
Andy


--On 12. Dezember 2010 22:09:40 +0800 Punky Tse <punkytse at punknix.com> 
wrote:

> Hi Andy,
>
> On 12/12/2010 20:37, Andy wrote:
>> c) voyage-current.iso  (downloaded 2010-12-10, 57667584 bytes)
>>
>> Boots fine, but USB HID keyboard IR remote control doesn't work at
>> all  - not even as a normal usb keyboard.
>> uname -a:
>> Linux voyage 2.6.32-voyage #1 PREEMPT Wed Dec 8 04:37:31 GMT 2010
>> i686  GNU/Linux
> For c), can you run lsusb command to show what is your USB keyboard
> devices.  As far as I know normal usb keyboard should work unless it
> requires special HID extension, which voyage kernel may not support.
>
> The 2.6.33rt kernel is not compiled to i486 by mistake.  I am now
> rebuild it now so that the newer kernel, i.e, date after Dec 8 should
> support C3.
>
> Regards,
> Punky
>
>