[Voyage-linux] Voyage MPD with kernel/cpu w/o cx8 and cmov

[Andy]

Hi Punky,

the new Voyage MPD kernel boots just fine. Thanks.

The Twinhan RC works mostly: The /dev/hidraw* and /dev/input/event* 
device nodes are present and seem to work.
On the other hand only some keys work as a normal USB keyboard - e.g. 
the number keys "0"-"9" do not work, but some special keys generate key 
codes like "^@", "^[[P", "[P", "[25~" at the login prompt.
This is not a problem for me as I only need the device nodes, but I 
think this is not the desired behavior.

Regards,
Andy


--On 13. Dezember 2010 02:08:28 +0800 Punky Tse <punkytse at punknix.com> 
wrote:

> Hi Andy,
>
> 2.6.33rt kernel is rebuilt with i486 support.  This should work with
> C3 now.  2.6.32 and 33rt kernels are also included with TwinHan HID
> support.  Please test and let me know the result.
>
> http://www.voyage.hk/dists/experimental/linux/
>
> The daily build will need to wait for half day before the updated
> kernel is included.
>
> Regards,
> Punky
>
>
>
> On 12/12/2010 22:35, Andy wrote:
>> Hi Punky,
>>
>> I will try the new MPD ISO image later. Here the output of lsusb:
>>
>> root at voyage:~# lsusb
>> Bus 001 Device 002: ID 6253:0100 TwinHan Technology Co., Ltd Ir
>> reciver f. remote control
>> Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>
>> root at voyage:~# lsusb -v   (I removed the "Linux Foundation 1.1 root
>> hub" output)
>>
>> Bus 001 Device 002: ID 6253:0100 TwinHan Technology Co., Ltd Ir
>> reciver f. remote control
>> Device Descriptor:
>>  bLength                18
>>  bDescriptorType         1
>>  bcdUSB               1.10
>>  bDeviceClass            0 (Defined at Interface level)
>>  bDeviceSubClass         0
>>  bDeviceProtocol         0
>>  bMaxPacketSize0         8
>>  idVendor           0x6253 TwinHan Technology Co., Ltd
>>  idProduct          0x0100 Ir reciver f. remote control
>>  bcdDevice            1.00
>>  iManufacturer           1 Twinhan Tech
>>  iProduct                2 Remote Control
>>  iSerial                 3 1111111
>>  bNumConfigurations      1
>>  Configuration Descriptor:
>>    bLength                 9
>>    bDescriptorType         2
>>    wTotalLength           59
>>    bNumInterfaces          2
>>    bConfigurationValue     1
>>    iConfiguration          4 USB Remote Control
>>    bmAttributes         0xa0
>>      (Bus Powered)
>>      Remote Wakeup
>>    MaxPower              100mA
>>    Interface Descriptor:
>>      bLength                 9
>>      bDescriptorType         4
>>      bInterfaceNumber        0
>>      bAlternateSetting       0
>>      bNumEndpoints           1
>>      bInterfaceClass         3 Human Interface Device
>>      bInterfaceSubClass      1 Boot Interface Subclass
>>      bInterfaceProtocol      1 Keyboard
>>      iInterface              0
>>        HID Device Descriptor:
>>          bLength                 9
>>          bDescriptorType        33
>>          bcdHID               1.10
>>          bCountryCode            0 Not supported
>>          bNumDescriptors         1
>>          bDescriptorType        34 Report
>>          wDescriptorLength      63
>>         Report Descriptors:
>>           ** UNAVAILABLE **
>>      Endpoint Descriptor:
>>        bLength                 7
>>        bDescriptorType         5
>>        bEndpointAddress     0x81  EP 1 IN
>>        bmAttributes            3
>>          Transfer Type            Interrupt
>>          Synch Type               None
>>          Usage Type               Data
>>        wMaxPacketSize     0x0008  1x 8 bytes
>>        bInterval              10
>>    Interface Descriptor:
>>      bLength                 9
>>      bDescriptorType         4
>>      bInterfaceNumber        1
>>      bAlternateSetting       0
>>      bNumEndpoints           1
>>      bInterfaceClass         3 Human Interface Device
>>      bInterfaceSubClass      1 Boot Interface Subclass
>>      bInterfaceProtocol      2 Mouse
>>      iInterface              0
>>        HID Device Descriptor:
>>          bLength                 9
>>          bDescriptorType        33
>>          bcdHID               1.10
>>          bCountryCode            0 Not supported
>>          bNumDescriptors         1
>>          bDescriptorType        34 Report
>>          wDescriptorLength      52
>>         Report Descriptors:
>>           ** UNAVAILABLE **
>>      Endpoint Descriptor:
>>        bLength                 7
>>        bDescriptorType         5
>>        bEndpointAddress     0x82  EP 2 IN
>>        bmAttributes            3
>>          Transfer Type            Interrupt
>>          Synch Type               None
>>          Usage Type               Data
>>        wMaxPacketSize     0x0004  1x 4 bytes
>>        bInterval              10
>> Device Status:     0x0002
>>  (Bus Powered)
>>  Remote Wakeup Enabled
>>
>>
>> Kind regards and many thanks for the great support
>> Andy
>>
>>
>> --On 12. Dezember 2010 22:09:40 +0800 Punky Tse
>> <punkytse at punknix.com>  wrote:
>
>