[Voyage-linux] [ASK] Alix CF problem

[Gustin Johnson]

Are you using a USB to Serial adaptor on the computer that you are
running minicom on?


2011/8/15 Laili Aidi <aidi at kth.se>:
> Hello,
> Currently I'm trying to set up a WSN/DTN gateway in the Alix board.
> I just installed the Alix board with Voyage 0.7.5 version using CF
> card. After the installation success, I plug the CF to the board again and
> power it up.
> But when trying to connect through the serial connection, the minicom detect
> no such /dev/ttyUSB0.
> I tried to move out the CF again, and put it into the CF reader, but now
> even the CF card is not detected at all what so ever we try to plug it in
> different linux machines. The other CF is detected using the same CF reader,
> and before this CF can be read, as I used it to install the Voyage 0.7.5
> into it.
> Anybody gas some idea about this? is that something problem with the CF?
> Aidi
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux
>
>