[Voyage-linux] [ASK] Alix CF problem

[Laili Aidi]

Dear Gustin,

Yes, I used both USB to Serial adaptor and CF reader. I managed to connect to the board before, i used 0.6. and I just installed voyage 0.7.5 to the board,
After installation finish, the I plugged the CF to the board, but the minicom never detect the connection. Then I tried to unplug the CF from the board again, and put it into the CF, but now it can't be read anymore. I use this configuration in minicom (it worked before with the same CF):

A - Serial Device: /dev/ttyUSB0

B - Lockfile Location: /var/lock

C - Callin Program:

D - Callout Program:

E - Bps/Par/Bits: 38400 8N1

F - Hardware Flow Control: No

G - Software Flow Control: No

Aidi

On 16 aug 2011, at 02.18, Gustin Johnson wrote:

Are you using a USB to Serial adaptor on the computer that you are
running minicom on?


2011/8/15 Laili Aidi <aidi at kth.se<mailto:aidi at kth.se>>:
Hello,
Currently I'm trying to set up a WSN/DTN gateway in the Alix board.
I just installed the Alix board with Voyage 0.7.5 version using CF
card. After the installation success, I plug the CF to the board again and
power it up.
But when trying to connect through the serial connection, the minicom detect
no such /dev/ttyUSB0.
I tried to move out the CF again, and put it into the CF reader, but now
even the CF card is not detected at all what so ever we try to plug it in
different linux machines. The other CF is detected using the same CF reader,
and before this CF can be read, as I used it to install the Voyage 0.7.5
into it.
Anybody gas some idea about this? is that something problem with the CF?
Aidi
_______________________________________________
Voyage-linux mailing list
Voyage-linux at list.voyage.hk<mailto:Voyage-linux at list.voyage.hk>
http://list.voyage.hk/mailman/listinfo/voyage-linux



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.voyage.hk/pipermail/voyage-linux/attachments/20110816/94c4c6d3/attachment.html>