[Voyage-linux] Voyage-MPD install

[Kim-man 'Punky' TSE]

Hi Jeff,

Please check the read permission on /mnt/HD_a2/Musuc/flac and the directories/files underneath.  Use chmod -R ago+rx 
/mnt/HD_a2/Musuc/flac

Regards,
Punky


On 1/11/2011 4:23 AM, malibujeff at yahoo.com wrote:
> I've made some great progress, but i'm still not there yet.  Thanks to Punky, I
> now have Voyage-MPD installed.   It took me days to get NFS working with my NAS,
> but now I can see the NAS and the folder that contain my music folders/files
> using the ls command.  I was also able to get MPoD to connect to MPD, but that's
> where I still have a problem.  MPD is not seeing the files. I follwed your Mini
> Setup Recipe and used the following command:
>
>
> # ln -s /mnt/public/Music /var/lib/mpd/music/public
>
> Any way to check things to see where the problem is?
>
> Also my files on my NAS are located here:
>
>   /mnt/HD_a2/Music/flac
>
> and this is what I used when I nounted the NAS.  All my music is located in
> sub-directories under /mnt/HD_a2/Music/flac named after each album.  For example
>
> /mnt/HD_a2/Music/flac/Charles_Mingus_-_Blues_&_Roots.  The flac files are in the
> Charles_Mingus_-_Blues_&_Roots folder.
>
> Is this ok or do I have to do something else to see all of the directories under
> /mnt/HD_a2/Music/flac?
>
> Thanks,
>
> Jeff
>
>
> ----- Original Message ----
> From: Kim-man 'Punky' TSE<punkytse at punknix.com>
> To: Jeff<malibujeff at yahoo.com>
> Cc: voyage-linux<voyage-linux at voyage.hk>
> Sent: Wed, January 5, 2011 8:29:26 PM
> Subject: Re: [Voyage-linux] Voyage-MPD install
>
> Hi Jeff,
>
> type "/dev/sda" and it will install voyage linux to first partition, i.e.
> /dev/sda1
>
> Later, there will be another option (menu item 6) to erase entire disk or leave
> the disk as-is.  If you choose 1 -
>
> format and create filesystem, the whole /dev/sda will be reformatted,
>
> Regards,
> Punky
>
> On 1/6/2011 3:49 AM, Jeff wrote:
>> Punky,
>>
>> The screen shows the following:
>>
>> Partitions information
>> Major    Minor    #blocks        Name
>> 8       0 156290904<tel:156290904>         sda
>> 8       1 150280192<tel:150280192>          sda1
>> 8       2                   1           sda2
>> 8       5 6007808<tel:6007808>           sda5
>> 7       0          63160          loop0
>> 7       1         63160         loop1
>>
>> What do I enter to answer this question?  "which device accesses the target
>> disk [/dev/hde]?"
>>
>> Thanks
>>
>> Jeff
>>
>>
>>>> ----- Original Message ----
>>>> From: Kim-man 'Punky' TSE<punkytse at punknix.com
> <mailto:punkytse at punknix.com>>
>>>> To: malibujeff at yahoo.com<mailto:malibujeff at yahoo.com>
>>>> Sent: Sun, December 19, 2010 9:06:33 PM
>>>> Subject: Re: [Voyage-linux] Voyage-MPD install
>>>>
>>>> Hi Jeff,
>>>>
>>>> The screen should show all the partitions of your disks, what are they?
>>>>
>>>> On 12/20/2010 6:50 AM, malibujeff at yahoo.com<mailto:malibujeff at yahoo.com>
>>>> wrote:
>>>>>               Which device accesses the target disk {/dev/hde]?
>>>> -- Regards,
>>>> Punky
>>>>
>>>> Voyage Solutions (http://solution.voyage.hk)
>>>> * Embedded Solutions and Systems
>>>>    - Mesh Networking, Captive Portal, IP Surveillance, VoIP/PBX
>>>>    - Network Engineering, Development Platform and Consultation
>>>>
>>>>
>>>>
>>>
>>> -- 
>>> Regards,
>>> Punky
>>>
>>> Voyage Solutions (http://solution.voyage.hk)
>>> * Embedded Solutions and Systems
>>>   - Mesh Networking, Captive Portal, IP Surveillance, VoIP/PBX
>>>   - Network Engineering, Development Platform and Consultation
>>>
>>>
>>>
>


-- 
Regards,
Punky

Voyage Solutions (http://solution.voyage.hk)
* Embedded Solutions and Systems
   - Mesh Networking, Captive Portal, IP Surveillance, VoIP/PBX
   - Network Engineering, Development Platform and Consultation