[Voyage-linux] 4521 / 0.7.0 will not find root file system.
Steve Holdoway
(spam-protected)
Tue Jun 14 06:53:21 HKT 2011
Take 2 here, version 1 didn't seem to propagate. I cannot get Voyage
0.7.0 to boot on a Soekris 4521. I can install and run 0.6.5 by adding
the all_generic_ide option to the kernel line in grub's menu.lst, but
even when adding ide=nodma as well, the 4521 will not boot off CF.
Trying to boot without an initramfs is a complete disaster ( ) for root
devices /dev/hda1, /dev/sda1, and LABEL=ROOT_FS.
Requested info ( lspci not available with initamfs )
(initramfs)
cat /proc/partitions
major minor #blocks
name
(initramfs) dmesg
[ 0.000000] Linux version 2.6.32-voyage (2.6.32) (root at punknix-uml)
(gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 PREEMPT Mon Jan 17 07:48:25
GMT 2011
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000
(reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000
(reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000004000000 (usable)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000
(reserved)
[ 0.000000] DMI not present or invalid.
[ 0.000000] last_pfn = 0x4000 max_arch_pfn = 0x100000
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000004000000
[ 0.000000] 0000000000 - 0004000000 page 4k
[ 0.000000] kernel direct mapping tables up to 4000000 @ 7000-1a000
[ 0.000000] RAMDISK: 03caf000 - 03fef5d5
[ 0.000000] ACPI Error: A valid RSDP was not found
(20090903/tbxfroot-219)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 64MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 04000000
[ 0.000000] low ram: 0 - 04000000
[ 0.000000] node 0 low ram: 00000000 - 04000000
[ 0.000000] node 0 bootmap 00001000 - 00001800
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 -
0004000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0001000000 - 00013bd228] TEXT DATA BSS ==>
[0001000000 - 00013bd228]
[ 0.000000] #2 [0003caf000 - 0003fef5d5] RAMDISK ==>
[0003caf000 - 0003fef5d5]
[ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==>
[000009fc00 - 0000100000]
[ 0.000000] #4 [00013be000 - 00013c4000] BRK ==>
[00013be000 - 00013c4000]
[ 0.000000] #5 [0000007000 - 0000011000] PGTABLE ==>
[0000007000 - 0000011000]
[ 0.000000] #6 [0000001000 - 0000002000] BOOTMAP ==>
[0000001000 - 0000002000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00004000
[ 0.000000] HighMem 0x00004000 -> 0x00004000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00004000
[ 0.000000] On node 0 totalpages: 16287
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 96 pages used for memmap
[ 0.000000] Normal zone: 12192 pages, LIFO batch:1
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at 4000000 (gap:
4000000:fbf00000)
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 16159
[ 0.000000] Kernel command line: root=LABEL=ROOT_FS
console=ttyS0,19200n8 ide=nodma all_generic_ide
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768
bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384
bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 57308k/65536k available (2421k kernel code, 7816k
reserved, 969k data, 268k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffe4000 - 0xfffff000 ( 108 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xc4800000 - 0xff7fe000 ( 943 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc4000000 ( 64 MB)
[ 0.000000] .init : 0xc1350000 - 0xc1393000 ( 268 kB)
[ 0.000000] .data : 0xc125d7a8 - 0xc134fcf4 ( 969 kB)
[ 0.000000] .text : 0xc1000000 - 0xc125d7a8 (2421 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.001999] Calibrating delay loop... 64.12 BogoMIPS (lpj=32064)
[ 0.019996] Mount-cache hash table entries: 512
[ 0.023996] CPU: AMD 486 DX/4-WB stepping 04
[ 0.027995] Checking 'hlt' instruction... OK.
[ 0.049992] NET: Registered protocol family 16
[ 0.071989] PCI: PCI BIOS revision 2.00 entry at 0xf7861, last bus=2
[ 0.072988] PCI: Using configuration type 1 for base access
[ 0.204968] bio: create slab <bio-0> at 0
[ 0.211967] ACPI: Interpreter disabled.
[ 0.217966] vgaarb: loaded
[ 0.226965] SCSI subsystem initialized
[ 0.235964] PCI: Probing PCI hardware
[ 0.237963] PCI: Probing PCI hardware (bus 00)
[ 0.239963] pci 0000:00:10.0: reg 10 32bit mmio:
[0xa0000000-0xa000ffff]
[ 0.240963] pci 0000:00:11.0: reg 10 32bit mmio:
[0xa0010000-0xa0010fff]
[ 0.241963] pci 0000:00:11.0: supports D1 D2
[ 0.241963] pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.242962] pci 0000:00:11.0: PME# disabled
[ 0.244962] pci 0000:00:11.1: reg 10 32bit mmio:
[0xa0011000-0xa0011fff]
[ 0.244962] pci 0000:00:11.1: supports D1 D2
[ 0.244962] pci 0000:00:11.1: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.245962] pci 0000:00:11.1: PME# disabled
[ 0.246962] pci 0000:00:12.0: reg 10 io port: [0xe100-0xe1ff]
[ 0.246962] pci 0000:00:12.0: reg 14 32bit mmio:
[0xa0012000-0xa0012fff]
[ 0.247962] pci 0000:00:12.0: reg 30 32bit mmio pref:
[0x3f000000-0x3f00ffff]
[ 0.247962] pci 0000:00:12.0: supports D1 D2
[ 0.247962] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.248962] pci 0000:00:12.0: PME# disabled
[ 0.249961] pci 0000:00:13.0: reg 10 io port: [0xe200-0xe2ff]
[ 0.249961] pci 0000:00:13.0: reg 14 32bit mmio:
[0xa0013000-0xa0013fff]
[ 0.249961] pci 0000:00:13.0: reg 30 32bit mmio pref:
[0x3f000000-0x3f00ffff]
[ 0.250961] pci 0000:00:13.0: supports D1 D2
[ 0.250961] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.252961] pci 0000:00:13.0: PME# disabled
[ 0.279957] Switching to clocksource pit
[ 0.281186] pnp: PnP ACPI: disabled
[ 0.305205] pci 0000:00:13.0: BAR 6: address space collision on of
device [0x3f000000-0x3f00ffff]
[ 0.306338] pci 0000:00:11.0: CardBus bridge, secondary bus 0000:01
[ 0.307268] pci 0000:00:11.0: IO window: 0x001000-0x0010ff
[ 0.308255] pci 0000:00:11.0: IO window: 0x001400-0x0014ff
[ 0.309244] pci 0000:00:11.0: PREFETCH window: 0x4000000-0x7ffffff
[ 0.310394] pci 0000:00:11.0: MEM window: 0x8000000-0xbffffff
[ 0.311940] pci 0000:00:11.1: CardBus bridge, secondary bus 0000:05
[ 0.312570] pci 0000:00:11.1: IO window: 0x001800-0x0018ff
[ 0.313542] pci 0000:00:11.1: IO window: 0x001c00-0x001cff
[ 0.314528] pci 0000:00:11.1: PREFETCH window: 0xc000000-0xfffffff
[ 0.315676] pci 0000:00:11.1: MEM window: 0x10000000-0x13ffffff
[ 0.316266] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.316266] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.316266] pci_bus 0000:01: resource 0 io: [0x1000-0x10ff]
[ 0.316266] pci_bus 0000:01: resource 1 io: [0x1400-0x14ff]
[ 0.316266] pci_bus 0000:01: resource 2 pref mem
[0x4000000-0x7ffffff]
[ 0.316266] pci_bus 0000:01: resource 3 mem: [0x8000000-0xbffffff]
[ 0.316266] pci_bus 0000:05: resource 0 io: [0x1800-0x18ff]
[ 0.317281] pci_bus 0000:05: resource 1 io: [0x1c00-0x1cff]
[ 0.317281] pci_bus 0000:05: resource 2 pref mem
[0xc000000-0xfffffff]
[ 0.317281] pci_bus 0000:05: resource 3 mem: [0x10000000-0x13ffffff]
[ 0.318190] NET: Registered protocol family 2
[ 0.323187] IP route cache hash table entries: 1024 (order: 0, 4096
bytes)
[ 0.334200] TCP established hash table entries: 2048 (order: 2, 16384
bytes)
[ 0.335249] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.336726] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.338010] TCP reno registered
[ 0.341192] NET: Registered protocol family 1
[ 0.345200] RPC: Registered udp transport module.
[ 0.346230] RPC: Registered tcp transport module.
[ 0.347495] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.350200] Trying to unpack rootfs image as initramfs...
[ 5.102434] Freeing initrd memory: 3329k freed
[ 5.175467] platform rtc_cmos: registered platform RTC device (no PNP
device found)
[ 5.188463] microcode: CPU0: AMD CPU family 0x4 not supported
[ 5.191464] Microcode Update Driver: v2.00
<tigran at aivazian.fsnet.co.uk>, Peter Oruba
[ 5.216450] msgmni has been set to 118
[ 5.235480] alg: No test for stdrng (krng)
[ 5.237413] io scheduler noop registered
[ 5.239461] io scheduler anticipatory registered
[ 5.241208] io scheduler deadline registered
[ 5.241860] io scheduler cfq registered (default)
[ 7.301143] Linux agpgart interface v0.103
[ 7.303135] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 7.551077] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 7.800039] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 7.903073] brd: module loaded
[ 7.904757] Uniform Multi-Platform E-IDE driver
[ 7.908055] ide-gd driver 1.18
[ 7.922046] PNP: No PS/2 controller found. Probing ports directly.
[ 7.926545] i8042.c: Can't read CTR while initializing i8042.
[ 7.927099] i8042: probe of i8042 failed with error -5
[ 7.939045] mice: PS/2 mouse device common for all mice
[ 7.945048] cpuidle: using governor ladder
[ 7.946292] cpuidle: using governor menu
[ 7.964999] TCP cubic registered
[ 7.966096] NET: Registered protocol family 17
[ 7.981034] Freeing unused kernel memory: 268k freed
[ 9.505818] libata version 3.00 loaded.
[ 17.351610] natsemi dp8381x driver, version 2.1, Sept 11, 2006
[ 17.351610] originally by Donald Becker <becker at scyld.com>
[ 17.351610] 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
[ 17.542589] natsemi eth0: NatSemi DP8381[56] at 0xa0012000
(0000:00:12.0), 00:00:24:c4:be:98, IRQ 5, port TP.
[ 17.727568] natsemi eth1: NatSemi DP8381[56] at 0xa0013000
(0000:00:13.0), 00:00:24:c4:be:99, IRQ 9, port TP.
[ 23.748621] MadWifi: ath_attach: Switching rfkill capability off.
[ 23.896597] wifi0: Atheros AR5413 chip found (MAC 10.4, PHY SChip
6.1, Radio 6.3)
[ 23.901151] ath_pci: wifi0: Atheros 5413: mem=0xa0000000, irq=10
(initramfs)
--
Steve Holdoway BSc(Hons) MNZCS <steve at greengecko.co.nz>
http://www.greengecko.co.nz
MSN: steve at greengecko.co.nz
Skype: sholdowa
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 6544 bytes
Desc: not available
URL: <http://list.voyage.hk/pipermail/voyage-linux/attachments/20110614/c744eefe/attachment.bin>
More information about the Voyage-linux
mailing list