[Voyage-linux] Problem with /etc/init.d/rc.local and voyage 0.7.0

[Punky Tse]

Please read: 
http://www.debian.org/doc/FAQ/ch-customizing.en.html#s-custombootscripts

- Punky

On 16/5/2011 19:16, Luca wrote:
> Hi all,
> I have a little problem with voyage-linux 0.7.0. and my alix 3d3.
> This is my /etc/init.d/rc.local
> ...
> do_start() {
>          if [ -x /etc/rc.local ]; then
>                  [ "$VERBOSE" != no ]&&  log_begin_msg "Running local
> boot scripts (/etc/rc.local)"
>                  /etc/rc.local
>                  ES=$?
>                  [ "$VERBOSE" != no ]&&  log_end_msg $ES
>                  return $ES
>          fi
> }
>
> case "$1" in
>      start)
>          do_start
>          mount /dev/sda1 /mnt/scambio -o umask=000
>          echo 0>  /sys/class/leds/alix\:1/brightness
>          echo 0>  /sys/class/leds/alix\:2/brightness
>          echo 0>  /sys/class/leds/alix\:3/brightness
>        #  /etc/init.d/rc.firewall
>          ;;
>      restart|reload|force-reload)
>          echo "Error: argument '$1' not supported">&2
>          exit 3
>          ;;
>
> ....
> As you can see I mount a usb pendrive and I turn off LEDs. The problem
> is that LEDs do not go off, as if the statement was not executed while
> the usb pendrive is mounted correctly. If I enable script for the
> firewall (It is now commented) it still does not run at boot. If I run
> those commands from the console (after the boot) LEDs go off normally
> and the firewall starts normally. What's wrong?
>
> Thanks in advance.
>
> --
> Luca F.
>
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux


-- 

Regards,
Kim-man "Punky" Tse

* Open Source Embedded Solutions and Systems
   - Voyage Linux (http://linux.voyage.hk)
   - Voyage ONE   (http://linux.voyage.hk/voyage-one)
   - Voyage MPD   (http://linux.voyage.hk/voyage-mpd)
* Voyage Store   (http://store.voyage.hk)