[Voyage-linux] Problem with /etc/init.d/rc.local and voyage 0.7.0

[Luca]

Thanks for the help.
I have read that document. Now /etc/init.d/rc.firewall starts
regularly. I have add

case "$1" in "start")   instead of case "$1" in "") inside rc.firewall script
....
and run the command
update-rc.d rc.firewall defaults 19.
I did the same thing for LEDs. I have created a script called rc.leds:


#!/bin/sh
### BEGIN INIT INFO
# Provides:          Disable leds
# Required-Start:    $remote_fs $syslog
# Required-Stop:     $remote_fs $syslog
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Script to disable leds
# Description:       This file should be used to construct scripts to be
#                    placed in /etc/init.d.
### END INIT INFO

case "$1" in
"start")
echo 0 > /sys/class/leds/alix\:1/brightness
echo 0 > /sys/class/leds/alix\:2/brightness
echo 0 > /sys/class/leds/alix\:3/brightness
;;
"stop")
echo 1 > /sys/class/leds/alix\:1/brightness
echo 1 > /sys/class/leds/alix\:2/brightness
echo 1 > /sys/class/leds/alix\:3/brightness
;;
esac

 I put it in /etc/init.d and I gave executable permission before run:
update-rc.d rc.leds defaults 19
but after a reboot LEDs remain lit. What's wrong?

--
Luca F.

2011/5/16 Punky Tse <punkytse at punknix.com>:
> Please read:
> http://www.debian.org/doc/FAQ/ch-customizing.en.html#s-custombootscripts
>
> - Punky
>
> On 16/5/2011 19:16, Luca wrote:
>>
>> Hi all,
>> I have a little problem with voyage-linux 0.7.0. and my alix 3d3.
>> This is my /etc/init.d/rc.local
>> ...
>> do_start() {
>>         if [ -x /etc/rc.local ]; then
>>                 [ "$VERBOSE" != no ]&&  log_begin_msg "Running local
>> boot scripts (/etc/rc.local)"
>>                 /etc/rc.local
>>                 ES=$?
>>                 [ "$VERBOSE" != no ]&&  log_end_msg $ES
>>                 return $ES
>>         fi
>> }
>>
>> case "$1" in
>>     start)
>>         do_start
>>         mount /dev/sda1 /mnt/scambio -o umask=000
>>         echo 0>  /sys/class/leds/alix\:1/brightness
>>         echo 0>  /sys/class/leds/alix\:2/brightness
>>         echo 0>  /sys/class/leds/alix\:3/brightness
>>       #  /etc/init.d/rc.firewall
>>         ;;
>>     restart|reload|force-reload)
>>         echo "Error: argument '$1' not supported">&2
>>         exit 3
>>         ;;
>>
>> ....
>> As you can see I mount a usb pendrive and I turn off LEDs. The problem
>> is that LEDs do not go off, as if the statement was not executed while
>> the usb pendrive is mounted correctly. If I enable script for the
>> firewall (It is now commented) it still does not run at boot. If I run
>> those commands from the console (after the boot) LEDs go off normally
>> and the firewall starts normally. What's wrong?
>>
>> Thanks in advance.
>>
>> --
>> Luca F.
>>
>> _______________________________________________
>> Voyage-linux mailing list
>> Voyage-linux at list.voyage.hk
>> http://list.voyage.hk/mailman/listinfo/voyage-linux
>
>
> --
>
> Regards,
> Kim-man "Punky" Tse
>
> * Open Source Embedded Solutions and Systems
>  - Voyage Linux (http://linux.voyage.hk)
>  - Voyage ONE   (http://linux.voyage.hk/voyage-one)
>  - Voyage MPD   (http://linux.voyage.hk/voyage-mpd)
> * Voyage Store   (http://store.voyage.hk)
>
>