[Voyage-linux] Connectivity through a 3G USB modem

[Konstantinos Birkos]

Yes, I managed to connect. Actually I needed to install usb-modeswitch 
and write two scripts: one with the connections parameters and another 
one handling  connection establishment.  For some reason I cannot 
understand, although I can connect, receive updates, use ftp etc., I 
cannot ping other computers and neither can other computers ping me 
(plus that the green light on the stick keeps flashing on and off 
continuously).
Thanks for your feedback.

Regards,
Kostas

O/H Beat Meier έγραψε:
> Have you solved your problem?
> I had such a modem working (ZTE MF110) on voyage-0.5 some time ago but 
> have to search how I did.
> If you still have the problem send a note and I will search my old cf 
> flash with the installation!
>
> Greetings
>
> Beat
>
> On 05/22/2011 08:11 PM, Konstantinos Birkos wrote:
>> I am trying to get a 3G USB modem working in an ALIX.3d3 board with 
>> Voyage Linux MPD 0.7. The modem is a ZTE MF110 and works perfectly in 
>> common Linux distributions.
>> What steps should I follow? Until now I have found partial 
>> instructions, instructions that involve a GUI or solutions to 
>> specific problems but not a concrete set of instructions.  Just to 
>> mention that when I plug the modem it is recognized as a scsi usb 
>> storage device and a scsi CD-ROM drive but no ttyUSB0 or ttyUSB1 
>> appears as a device. Any point to start with?
>>
>>
>> _______________________________________________
>> Voyage-linux mailing list
>> Voyage-linux at list.voyage.hk
>> http://list.voyage.hk/mailman/listinfo/voyage-linux
>>
>


-- 
Konstantinos Birkos
PhD Candidate
Wireless Telecommunication Laboratory
Department of Electrical and Computer Engineering
University of Patras
Patras, Greece
Tel.: +30 2610 996465