[Voyage-linux] Voyage 0.8.0 - "Route add" command doesn't work

[mad qwerty]

2011/9/19 Gustin Johnson <gustin at meganerd.ca>

> It does not use the whole range because the gateway (it's own) IP has
> to be outside that range.  Unless of course the netmask is 255.255.0.0
> then perhaps it does use all of 192.168.1.XXX.  It is probably a good
> idea to confirm the actual DHCP range as well as the netmask.
>
> You can also configure the /etc/network/interfaces by pulling the CF
> card and mounting it on another machine (likely the one you used to
> install to the CF card in the first place).
>
> Did you say your serial console was crashing?
>
>

consider that my problem of "add route.." was solved by using the correct IP
of my gateway, finnally it was a banal typo of mine..
then, DHCP space ranges from 192.168.1.2 to 192.168.1.254 , and netmask is
255.255.255.0

i'm not using Alix or similar but a AMD E-350 Mini-ITX MoBo from Asus,
no serial here (except considering usb-rs232 converters or keyboard ps/2
input)
video console is crashing (i'm talking about in these days on mail list)

tried to "save" eth0 connection while "working" on wlan0,
but dramaticaly failed :-( found somehow working solution, solved.. until
video consolle wake-up :-)

regards,
marco
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.voyage.hk/pipermail/voyage-linux/attachments/20110919/acbae656/attachment.html>