[Voyage-linux] ALIX 2D13 boot from IDE

[Michael Steinmann]

you can mix IDE and CF, but since the CF is set to master by the alix hw
design you MUST set the IDE drive to slave.
Of course it then boots to the CF because it is set to master.

Michael

2012/2/4 Pippo Pippo 77 <pippopippo77 at email.it>

> Hi,
> many thanks to all.
> I'll try as soon as arrive new alix.
>
> Marco
>
>
> 2012/2/4 mark czardybon <max at inbox.eu.org>
>
>> > 012/2/3 Pippo Pippo 77 <pippopippo77 at email.it>:
>> > Hi All,
>> > I would like to know, if it's possible to boot Voyage linux, from IDE
>> Drive,
>> > instead CF on a Alix 2D13 board.
>> > Many Thanks
>>
>> ehlo.a.
>>
>> IDE port and CF are visible to system as the same device. So if you
>> want to boot from IDE device you have to unplug CF card. Then board
>> bios will try to boot from IDE device.
>>
>> You can't mix IDE device and CF card. This is limitation of the
>> hardware on Alix board.
>>
>> --
>> marek czardybon / maxilee   +48  697 724 404       http://inbox.eu.org
>> GG:3299479 JAB:max at inbox.eu.org                   http://outbox.eu.org
>> ARP: 00:90:CC:43:D8:0D         GCC d? s:- a C+++ UL++ P++ L++ E--- W+
>> N+ o K w--- O M- V- PS+ PE+ Y PGP t 5 X+R+ !tv b+ DI- D++ G e h r++ y?
>>
>
>
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.voyage.hk/pipermail/voyage-linux/attachments/20120204/d981cda2/attachment.html>