[Voyage-linux] ALIX 2D13 boot from IDE

[Pippo Pippo 77]

Hi Michael,
But if i install only IDE drive, alix will boot from it? Thanks
Il giorno 04/feb/2012 14.07, "Michael Steinmann" <mike.steinmann at gmail.com>
ha scritto:

> you can mix IDE and CF, but since the CF is set to master by the alix hw
> design you MUST set the IDE drive to slave.
> Of course it then boots to the CF because it is set to master.
>
> Michael
>
> 2012/2/4 Pippo Pippo 77 <pippopippo77 at email.it>
>
>> Hi,
>> many thanks to all.
>> I'll try as soon as arrive new alix.
>>
>> Marco
>>
>>
>> 2012/2/4 mark czardybon <max at inbox.eu.org>
>>
>>> > 012/2/3 Pippo Pippo 77 <pippopippo77 at email.it>:
>>> > Hi All,
>>> > I would like to know, if it's possible to boot Voyage linux, from IDE
>>> Drive,
>>> > instead CF on a Alix 2D13 board.
>>> > Many Thanks
>>>
>>> ehlo.a.
>>>
>>> IDE port and CF are visible to system as the same device. So if you
>>> want to boot from IDE device you have to unplug CF card. Then board
>>> bios will try to boot from IDE device.
>>>
>>> You can't mix IDE device and CF card. This is limitation of the
>>> hardware on Alix board.
>>>
>>> --
>>> marek czardybon / maxilee   +48  697 724 404       http://inbox.eu.org
>>> GG:3299479 JAB:max at inbox.eu.org                   http://outbox.eu.org
>>> ARP: 00:90:CC:43:D8:0D         GCC d? s:- a C+++ UL++ P++ L++ E--- W+
>>> N+ o K w--- O M- V- PS+ PE+ Y PGP t 5 X+R+ !tv b+ DI- D++ G e h r++ y?
>>>
>>
>>
>> _______________________________________________
>> Voyage-linux mailing list
>> Voyage-linux at list.voyage.hk
>> http://list.voyage.hk/mailman/listinfo/voyage-linux
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.voyage.hk/pipermail/voyage-linux/attachments/20120204/08267fbb/attachment.html>