[Voyage-linux] Problem connecting to ALIX 3D3 via USB-to-Serial cable

[Jon Meek]

Note that the ALIX default baud rate is 38400, that is likely your problem.

Jon

On Sun, Jul 8, 2012 at 6:33 AM,  <kmpirkos at ece.upatras.gr> wrote:
> It is a no-name cable based on the CH340 chipset. I am also using a serial
> female-to-female extension to connect it with the board. I 'll try your
> cable.
>
>
> Rainer Stratmann wrote:
>
> Am Sunday 08 July 2012 10:55:53 schrieb Konstantinos Birkos:
>> Hello all,
>>
>> I have an ALIX 3D3 board with Voyage MPD 0.8.5 installed and serial
>> terminal chosen during the installation process. I am trying to connect
>> to the device via a USB-to-Serial cable
> which one?
> I do it very successfull with USB-serial devices with FTDI chipset.
> http://www.reichelt.de/USB-Konverter/DIGITUS-DA-70156/3/index.html?;ACTION=3;LA=446;ARTICLE=99617
>> unsuccessfully. I have tried
>> Putty through Windows and Putty, GTKTerm and minicom through Ubuntu
>> 12.04. When I power up my device, I see no messages in the terminal.
>> Sometimes under minicom, if I hit the keyboard of my host computer I
>> receive some input/output errors.
>>
>> Any suggestions?
>
>
>
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux
>
>
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux
>