[Voyage-linux] Problem connecting to ALIX 3D3 via USB-to-Serial cable

[Rajarajan Rajamani]

BTW do you have a null modem adapter ? I had similar problems and got
it working once I got the null modem adapter.

On Sun, Jul 8, 2012 at 9:32 AM, Jon Meek <meekjt at gmail.com> wrote:
> Note that the ALIX default baud rate is 38400, that is likely your problem.
>
> Jon
>
> On Sun, Jul 8, 2012 at 6:33 AM,  <kmpirkos at ece.upatras.gr> wrote:
>> It is a no-name cable based on the CH340 chipset. I am also using a serial
>> female-to-female extension to connect it with the board. I 'll try your
>> cable.
>>
>>
>> Rainer Stratmann wrote:
>>
>> Am Sunday 08 July 2012 10:55:53 schrieb Konstantinos Birkos:
>>> Hello all,
>>>
>>> I have an ALIX 3D3 board with Voyage MPD 0.8.5 installed and serial
>>> terminal chosen during the installation process. I am trying to connect
>>> to the device via a USB-to-Serial cable
>> which one?
>> I do it very successfull with USB-serial devices with FTDI chipset.
>> http://www.reichelt.de/USB-Konverter/DIGITUS-DA-70156/3/index.html?;ACTION=3;LA=446;ARTICLE=99617
>>> unsuccessfully. I have tried
>>> Putty through Windows and Putty, GTKTerm and minicom through Ubuntu
>>> 12.04. When I power up my device, I see no messages in the terminal.
>>> Sometimes under minicom, if I hit the keyboard of my host computer I
>>> receive some input/output errors.
>>>
>>> Any suggestions?
>>
>>
>>
>> _______________________________________________
>> Voyage-linux mailing list
>> Voyage-linux at list.voyage.hk
>> http://list.voyage.hk/mailman/listinfo/voyage-linux
>>
>>
>> _______________________________________________
>> Voyage-linux mailing list
>> Voyage-linux at list.voyage.hk
>> http://list.voyage.hk/mailman/listinfo/voyage-linux
>>
>
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux