[Voyage-linux] Alix3D3 + Voyage 0.8.0 (daily build 20120308): no LEDs, no watchdog

[Kim-man 'Punky' TSE]

Hi Achim,

What does the following commands shows?

~# cat /boot/config-3.2.6-voyage |egrep "LEDS_G|GPIO_CS|ALIX"

~# cat /proc/cmdline

and check dmesg output something relate to alix or led:


On 3/9/2012 6:25 PM, Achim Vollhardt wrote:
> Hi Punky,
> changed the switch in menu.lst to alix.force=1, but still no LEDs and no /dev/watchdog.
>
>> Note: You must still enable the drivers for GPIO and LED support
>> (GPIO_CS5535 & LEDS_GPIO) to actually use the LEDs
>
> How is this done? Sorry for the likely stupid question.. I am new to Linux and tried google, but with little success..
>
> Thanks,
> Achim
>
>
>
>


-- 
Regards,
Kim-man "Punky" Tse

* Open Source Embedded Solutions and Systems
   - Voyage Linux (http://linux.voyage.hk)
   - Voyage ONE   (http://linux.voyage.hk/voyage-one)
   - Voyage MPD   (http://linux.voyage.hk/voyage-mpd)
* Voyage Store   (http://store.voyage.hk)