[Voyage-linux] USB DAC problems with Voyage 0.8 and new Voyage 0.8.5

[Kim-man 'Punky' TSE]

Hi Bruno,

Can you show the output of the following commands:
1. "lsusb"
2. "cat /proc/asound/cards"

You may try to unplug the USB cable and replug it to see if this is solved.  My XMOS development board sometimes goes to 
UAC1.0 mode and no sound.  After replug it is change back to 2.0 mode and it works perfectly.

On 5/23/2012 12:47 AM, Bruno wrote:
> I have an USB DAC (Calyx) that works very fine with Voyage MPD 0.7.5.
> When I installed Voyage MPD 0.8 I started to have problem. The DAC is recognized, but it does not sound. When plugged 
> to the USB port, appear these messages:
>
> cannot get ctl value: req=0x83, wValue=0x201, wIndex=0Xa00, type=4
> cannot get ctl value: req=0x83, wValue=0x200, wIndex=0Xa00, type=4
>
> Same problem with Voyage MPD 0.8.5
>
> Does someone have had the same problem? How to solve it?
> Thanks
> Bruno
>


-- 
Regards,
Kim-man "Punky" Tse

* Open Source Embedded Solutions and Systems
   - Voyage Linux (http://linux.voyage.hk)
   - Voyage ONE   (http://linux.voyage.hk/voyage-one)
   - Voyage MPD   (http://linux.voyage.hk/voyage-mpd)
* Voyage Store   (http://store.voyage.hk)