[Voyage-linux] USB DAC problems with Voyage 0.8 and new Voyage 0.8.5

[Bruno]

I reinstalled Voyage MPD 0.8.5, configured everything and the USB DAC 
played correctly. BUT, after the first reboot, didn't played anymore!!! 
I tried to reboot again, nothing. Tried to unplug and replug USB cable 
several times, nothing.

lsusb:

Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 016: ID 20b1:0002 XMOS Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

cat /proc/asound/cards:

  0 [C20            ]: USB-Audio - Calyx USB Audio 2.0
                       Calyx Calyx USB Audio 2.0 at usb-0000:00:0f.5-3, 
high speed
  1 [Juli           ]: ICE1724 - ESI Juli@
                       ESI Juli@ at 0xff00, irq 10

Any idea?

Thanks
Bruno

Il 23/05/2012 04:27, Kim-man 'Punky' TSE ha scritto:
> Hi Bruno,
>
> Can you show the output of the following commands:
> 1. "lsusb"
> 2. "cat /proc/asound/cards"
>
> You may try to unplug the USB cable and replug it to see if this is 
> solved.  My XMOS development board sometimes goes to UAC1.0 mode and 
> no sound.  After replug it is change back to 2.0 mode and it works 
> perfectly.
>
> On 5/23/2012 12:47 AM, Bruno wrote:
>> I have an USB DAC (Calyx) that works very fine with Voyage MPD 0.7.5.
>> When I installed Voyage MPD 0.8 I started to have problem. The DAC is 
>> recognized, but it does not sound. When plugged to the USB port, 
>> appear these messages:
>>
>> cannot get ctl value: req=0x83, wValue=0x201, wIndex=0Xa00, type=4
>> cannot get ctl value: req=0x83, wValue=0x200, wIndex=0Xa00, type=4
>>
>> Same problem with Voyage MPD 0.8.5
>>
>> Does someone have had the same problem? How to solve it?
>> Thanks
>> Bruno
>>
>
>