[Voyage-linux] Errors during boot of 0.9.1 on ALIX

[Teco Boot]

Hi Punky,

Here my findings so far. 
I use my own install script, but for this verification I used voyage-pxe.
I'll sync my scripts and the 0.9.2 rc.


1) PXE README.pxe 
Before voyage-pxe can be started, remount-rw has to be performed.
After installation, I have:
/usr/local/sbin/voyage-install.sh: .voyage-install.conf: Read-only file system
/usr/local/sbin/voyage-install.sh: test.conf: Read-only file system


2)
Kernel is quite old, it is 3.10.11. We are at 3.10.23 at the moment.


3)
On Alix board, I have:
[    0.000000] ACPI BIOS Bug: Error: A valid RSDP was not found (20130328/tbxfroot-218)

[    1.643280] ACPI Exception: AE_BAD_PARAMETER, Thread 3473054656 could not acquire Mutex [0x1] (20130328/utmutex-285)
[    1.647271] ACPI Exception: AE_BAD_PARAMETER, Thread 3473054656 could not acquire Mutex [0x1] (20130328/utmutex-285)
[    1.652062] ACPI Exception: AE_BAD_PARAMETER, Thread 3473054656 could not acquire Mutex [0x1] (20130328/utmutex-285)
[    1.654997] ACPI Exception: AE_BAD_PARAMETER, Thread 3473054656 could not acquire Mutex [0x1] (20130328/utmutex-285)
[    1.657924] ACPI Exception: AE_BAD_PARAMETER, Thread 3473054656 could not acquire Mutex [0x1] (20130328/utmutex-285)


4)
DEFCONSOLE=console=ttyS0,115200n8 nomfgpt
LIVE_GETTY=
AUTOINSTALL=
Setting Serial Port to ttyS0 115200
sed: can't create temp file '/root/etc/inittabSYqG9O': Read-only file system


5)
[    5.646127] Error: Driver 'pcspkr' is already registered, aborting...


6)
[info] Loading kernel module rtc.
FATAL: Module rtc not found.

Verified:
root at voyage:/etc# modprobe rtc
FATAL: Module rtc not found.


7)
During update-initramfs -u:
===
Warning: Not updating LILO; /etc/lilo.conf not found!


Try to get it as clean as possible? With reasonable efforts of course.

For further testing, I have to compile some kernel modules. Are headers for this daily available? Or the sdk? It would be nice to have more verification tests completed before a 0.9.2 is released.


Thanks, Teco



Op 9 dec. 2013, om 14:12 heeft Punky Tse <punkytse at punknix.com> het volgende geschreven:

> Hi Teco,
> 
> Please test daily to see what is still missing.
> 
> Regards,
> Punky
> 
> On 11/28/2013 2:18 AM, Teco Boot wrote:
>> Hi Punky,
>> 
>> I’m preparing an upgrade procedure to 0.9.1 (or perhaps wait for new 0.9.2). I’ll put some effort in having a clean boot.
>> Are the topics below addressed? I know this is minor, but it hides other more important warnings.
>> 
>> Thanks, Teco
>> 
>> 
>> Op 17 jul. 2013, om 15:31 heeft Erik van Linstee <erik at vanlinsteeict.nl> het volgende geschreven:
>> 
>>> On 17-07-13 15:08, Punky Tse wrote:
>>>> I can't answer all, but try my best. But almost all of them do not
>>>> affect your operation, right?
>>> As far as I can tell, no they don't, but I am just getting started testing.
>>> 
>>>> What ALIX board are you using?
>>> 2d13
>>> 
>>>> Not sure, perhaps you are using ALIX3d3.
>>> No, 2d13. It seems some ACPI device where expected but could not be found.
>>> 
>>> 
>>>>>> sed: can't create temp file '/root/etc/inittabYp7rxF': Read-only
>>>>> file system
>>>>>> done.
>>>> This is used for PXE installation, could safely ignore.
>>> I see. I disabled the line in the init-bottom script.
>>> 
>>>>>> [    6.488793] Error: Driver 'pcspkr' is already registered,
>>>>> aborting...
>>>>>> [info] Loading kernel module w83627hf.
>>>>>> ERROR: could not insert 'w83627hf': No such device
>>>> w83627 no longer be used for ALIX, not sure why.  But should be remove
>>>> from ALIX installation profile.
>>> Oke, will do. You will fix this in 0.9.x?
>>> 
>>>>>> can't create /var/lib/dhcp/dhclient.eth0.leases: No such file or
>>>>> directory
>>>>> Actually, the directory does exist, by /var/lib/dhcp is mounted readonly.
>>>> Known, the leases file remember what IP your have leased.  If this bugs
>>>> you,  you can add "var/lib/dhcp" to $VOYAGE_SYNC_RECOVER_DIRS and/or
>>>> $VOYAGE_SYNC_DIRS in /etc/default/voyage-sync
>>> I already did. But that does not help. This runs before the tmpfs is created.
>>> 
>>> 
>>>> This was fixed in voyage-util 0.12-4, after 0.9.1, the key could be
>>>> regenerated by "dpkg-reconfigure openssh-server"
>>> Great.
>>> 
>>>> leds-alix is obsoleted.  Leds is now using GPIO_CS5535 to drive. Works
>>>> on ALIX2 and ALIX3d2.
>>> Aha.
>>> 
>>> Thanks
>>> Erik
>>> 
>>> 
>>> -- 
>>>   ir. E.J.P. (Erik) van Linstee
>>>   Van Linstee ICT
>>>   0467-111230
>>> 
>>> 
>>> _______________________________________________
>>> Voyage-linux mailing list
>>> Voyage-linux at list.voyage.hk
>>> http://list.voyage.hk/mailman/listinfo/voyage-linux
> 
> 
> -- 
> 
> Regards,
> Kim-man "Punky" Tse
> 
> * Open Source Embedded Solutions and Systems
>  - Voyage Linux (http://linux.voyage.hk)
>  - Voyage MPD   (http://linux.voyage.hk/voyage-mpd)
>  - Voyage MuBox (http://mubox.voyage.hk)
> * Voyage Store   (http://store.voyage.hk)
>