[Voyage-linux] Errors during boot of 0.9.1 on ALIX

[Punky Tse]

Hi Teco,

Please test daily to see what is still missing.

Regards,
Punky

On 11/28/2013 2:18 AM, Teco Boot wrote:
> Hi Punky,
>
> I’m preparing an upgrade procedure to 0.9.1 (or perhaps wait for new 0.9.2). I’ll put some effort in having a clean boot.
> Are the topics below addressed? I know this is minor, but it hides other more important warnings.
>
> Thanks, Teco
>
>
> Op 17 jul. 2013, om 15:31 heeft Erik van Linstee <erik at vanlinsteeict.nl> het volgende geschreven:
>
>> On 17-07-13 15:08, Punky Tse wrote:
>>> I can't answer all, but try my best. But almost all of them do not
>>> affect your operation, right?
>> As far as I can tell, no they don't, but I am just getting started testing.
>>
>>> What ALIX board are you using?
>> 2d13
>>
>>> Not sure, perhaps you are using ALIX3d3.
>> No, 2d13. It seems some ACPI device where expected but could not be found.
>>
>>
>>>>> sed: can't create temp file '/root/etc/inittabYp7rxF': Read-only
>>>> file system
>>>>> done.
>>> This is used for PXE installation, could safely ignore.
>> I see. I disabled the line in the init-bottom script.
>>
>>>>> [    6.488793] Error: Driver 'pcspkr' is already registered,
>>>> aborting...
>>>>> [info] Loading kernel module w83627hf.
>>>>> ERROR: could not insert 'w83627hf': No such device
>>> w83627 no longer be used for ALIX, not sure why.  But should be remove
>>> from ALIX installation profile.
>> Oke, will do. You will fix this in 0.9.x?
>>
>>>>> can't create /var/lib/dhcp/dhclient.eth0.leases: No such file or
>>>> directory
>>>> Actually, the directory does exist, by /var/lib/dhcp is mounted readonly.
>>> Known, the leases file remember what IP your have leased.  If this bugs
>>> you,  you can add "var/lib/dhcp" to $VOYAGE_SYNC_RECOVER_DIRS and/or
>>> $VOYAGE_SYNC_DIRS in /etc/default/voyage-sync
>> I already did. But that does not help. This runs before the tmpfs is created.
>>
>>
>>> This was fixed in voyage-util 0.12-4, after 0.9.1, the key could be
>>> regenerated by "dpkg-reconfigure openssh-server"
>> Great.
>>
>>> leds-alix is obsoleted.  Leds is now using GPIO_CS5535 to drive. Works
>>> on ALIX2 and ALIX3d2.
>> Aha.
>>
>> Thanks
>> Erik
>>
>>
>> -- 
>>    ir. E.J.P. (Erik) van Linstee
>>    Van Linstee ICT
>>    0467-111230
>>
>>
>> _______________________________________________
>> Voyage-linux mailing list
>> Voyage-linux at list.voyage.hk
>> http://list.voyage.hk/mailman/listinfo/voyage-linux


-- 

Regards,
Kim-man "Punky" Tse

* Open Source Embedded Solutions and Systems
   - Voyage Linux (http://linux.voyage.hk)
   - Voyage MPD   (http://linux.voyage.hk/voyage-mpd)
   - Voyage MuBox (http://mubox.voyage.hk)
* Voyage Store   (http://store.voyage.hk)