[Voyage-linux] Stratum 1 NTP server

[info]

Hi,

 There's a project here that would worth to take a look at to put some
light on your issue:

http://www.teenychron.com/

Cheers

Jag

El 24/06/13 06:38, Jon Meek escribió:
> Here is a good reference for the 4501 as a Stratum 1 NTP server:
>
> http://c59951.r51.cf2.rackcdn.com/5348-160-vandrunen.pdf
>
>
> I am currently testing the Raspberry Pi as a Stratum 1 NTP server
> based on work by others, and will also try to implement it on a PC
> Engines ALIX board.
>
> Jon
>
>
>
> On Sun, Jun 23, 2013 at 5:13 PM, Jaap Winius <jwinius at umrk.nl
> <mailto:jwinius at umrk.nl>> wrote:
>
>     Hi folks,
>
>     Recently I installed Voyage Linux 0.9.1 on my Soekris net4501. I'd
>     like
>     to use it as a dedicated stratum 1 NTP server with gpsd and a GPS
>     receiver attached to the serial port. However, although it does
>     receive
>     the NMEA data, there seems to be no PPS signal. Moreover, even as a
>     stratum 2 server its offset and latency times are terrible, e.g.
>     2500 and
>     800 ms respectively.
>
>     Would anyone have an idea about what might be causing behavior
>     this and
>     maybe how to fix it?
>
>     Thanks,
>
>     Jaap
>
>
>     _______________________________________________
>     Voyage-linux mailing list
>     Voyage-linux at list.voyage.hk <mailto:Voyage-linux at list.voyage.hk>
>     http://list.voyage.hk/mailman/listinfo/voyage-linux
>
>
>
>
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.voyage.hk/pipermail/voyage-linux/attachments/20130624/15f51539/attachment.html>