[Voyage-linux] Stratum 1 NTP server

[Jon Meek]

On Mon, Jun 24, 2013 at 9:42 AM, Jaap Winius <jwinius at umrk.nl> wrote:

> On Mon, 24 Jun 2013 00:38:38 -0400, Jon Meek wrote:
>
> > Here is a good reference for the 4501 as a Stratum 1 NTP server:
> >
> > http://c59951.r51.cf2.rackcdn.com/5348-160-vandrunen.pdf
>
> Right, I needed to know that. Instead of Voyage Linux, the OS used in the
> article is NanoBSD, but that's likely not important. The hardware
> modifications are, which is why I wasn't receiving a PPS signal. Luckily,
> the hardest part will be cutting a hole for the second COM port without
> mangling the chassis too much.
>
> Thanks Jon, and good luck with your ALIX board project.
>
> Cheers,
>
> Jaap
>
>
Here is some additional, possibly useful, information.

Raspberry Pi NTP with PPS on GPIO pin:  http://ntpi.openchaos.org/pps_pi/

Voyage Linux NTP with PPS on serial port:
http://whatexit.org/~meekj/jon_meek_ntp_poster2009a.pdf

I'm actually using my own 2009 work to adjust the Raspberry Pi
implementation.

Jon
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.voyage.hk/pipermail/voyage-linux/attachments/20130624/e470b1d3/attachment.html>