[Voyage-linux] DHCP server not working using dnsmasq config and nat.sh scripts

[cotarelo2]

Hi :)

I have configured my alix 2d2 running voyage 0.9.5 with two wireless
interfaces. One is in client mode (wlan0) and the other is in AP mode
(wlan1). Everything works fine but once the clients are authenticated in the
AP network they don't get an IP via DHCP and they can't ping any host on the
network.

These are my configuration files

/etc/network/interfaces.d/wlan0.conf


/etc/network/interfaces.d/wlan1.conf


/etc/hostapd/hostapd.wlan1.conf


/etc/dnsmasq.more.conf


So, what happens is when the client authenticates in the AP no DHCP request
is received. Just in case I am attaching here some logs

iptables --list


tail -f /var/log/syslog (on client auth)


And my routing table


What is wrong here? :confused:



--
View this message in context: http://voyage-linux.34677.n3.nabble.com/DHCP-server-not-working-using-dnsmasq-config-and-nat-sh-scripts-tp4026374.html
Sent from the Voyage Linux mailing list archive at Nabble.com.