[Voyage-linux] DHCP server not working using dnsmasq config and nat.sh scripts

[Henrik Kressner]

I had the same problem, last time this aftenoon.


dnsmasq does not seem diliver the correct DNS to the client.


I have give up on dnsmasq and is using isc-dhcp-server in stead.


Mayby dnsmasq can be configured to work, but i didnt get that far.




On 11-08-2015 18:41, cotarelo2 wrote:
> Hi :)
>
> I have configured my alix 2d2 running voyage 0.9.5 with two wireless
> interfaces. One is in client mode (wlan0) and the other is in AP mode
> (wlan1). Everything works fine but once the clients are authenticated in the
> AP network they don't get an IP via DHCP and they can't ping any host on the
> network.
>
> These are my configuration files
>
> /etc/network/interfaces.d/wlan0.conf
>
>
> /etc/network/interfaces.d/wlan1.conf
>
>
> /etc/hostapd/hostapd.wlan1.conf
>
>
> /etc/dnsmasq.more.conf
>
>
> So, what happens is when the client authenticates in the AP no DHCP request
> is received. Just in case I am attaching here some logs
>
> iptables --list
>
>
> tail -f /var/log/syslog (on client auth)
>
>
> And my routing table
>
>
> What is wrong here? :confused:
>
>
>
> --
> View this message in context: http://voyage-linux.34677.n3.nabble.com/DHCP-server-not-working-using-dnsmasq-config-and-nat-sh-scripts-tp4026374.html
> Sent from the Voyage Linux mailing list archive at Nabble.com.
>
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux
>


-- 

-------------------------------------------
Med venlig hilsen / Yours Sincerly
Henrik Kressner