[Voyage-linux] Raspberry install problems

[Steen Pedersen]

Hi

I would like to use Voyage on my Raspberry 2. However, I can't get the
install script to work.
I'm using an Debian 3.2.0-4-686-pae #1 SMP Debian 3.2.65-1+deb7u2 i686
GNU/Linux system.

When I start the mubox-install script I get this output. And nothing is
written to the SD-card.

Please help

Steen


root at debian-dell:/home/sbp# /home/sbp/Downloads/install-mubox-rpi.sh
/dev/mmcblk0
1+0 records in
1+0 records out
512 bytes (512 B) copied, 0.000791931 s, 647 kB/s
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF
disklabel
Building a new DOS disklabel with disk identifier 0xf6f14b8d.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.

Warning: invalid flag 0x0000 of partition table 4 will be corrected by
w(rite)

Command (m for help): Building a new DOS disklabel with disk identifier
0x7333616f.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.

Warning: invalid flag 0x0000 of partition table 4 will be corrected by
w(rite)

Command (m for help): Partition type:
   p   primary (0 primary, 0 extended, 4 free)
   e   extended
Select (default p): Partition number (1-4, default 1): First sector
(2048-15605759, default 2048): Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-15605759, default 15605759):
Command (m for help): Selected partition 1
Hex code (type L to list codes): Changed system type of partition 1 to c
(W95 FAT32 (LBA))

Command (m for help): Partition type:
   p   primary (1 primary, 0 extended, 3 free)
   e   extended
Select (default p): Partition number (1-4, default 2): First sector
(133120-15605759, default 133120): Using default value 133120
Last sector, +sectors or +size{K,M,G} (133120-15605759, default 15605759):
Using default value 15605759

Command (m for help): The partition table has been altered!

Calling ioctl() to re-read partition table.

WARNING: Re-reading the partition table failed with error 16: Device or
resource busy.
The kernel still uses the old table. The new table will be used at
the next reboot or after you run partprobe(8) or kpartx(8)

WARNING: If you have created or modified any DOS 6.x
partitions, please see the fdisk manual page for additional
information.
Syncing disks.
mkfs.vfat 3.0.13 (30 Jun 2012)
/dev/mmcblk01: No such file or directory
mke2fs 1.42.5 (29-Jul-2012)
Could not stat /dev/mmcblk02 --- No such file or directory

The device apparently does not exist; did you specify it correctly?
tune2fs 1.42.5 (29-Jul-2012)
tune2fs: No such file or directory while trying to open /dev/mmcblk02
Couldn't find valid filesystem superblock.

Disk /dev/mmcblk0: 7990 MB, 7990149120 bytes
4 heads, 16 sectors/track, 243840 cylinders, total 15605760 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x7333616f

        Device Boot      Start         End      Blocks   Id  System
/dev/mmcblk0p1            2048      133119       65536    c  W95 FAT32 (LBA)
/dev/mmcblk0p2          133120    15605759     7736320   83  Linux
mount: special device /dev/mmcblk02 does not exist
  % Total    % Received % Xferd  Average Speed   Time    Time     Time
 Current
                                 Dload  Upload   Total   Spent    Left
 Speed
100 42.1M  100 42.1M    0     0   176k      0  0:04:04  0:04:04 --:--:--
 146k
umount: /tmp/cf: not mounted
mount: special device /dev/mmcblk02 does not exist
  % Total    % Received % Xferd  Average Speed   Time    Time     Time
 Current
                                 Dload  Upload   Total   Spent    Left
 Speed
100   168    0   168    0     0    277      0 --:--:-- --:--:-- --:--:--
379
100 46.2M  100 46.2M    0     0  83318      0  0:09:41  0:09:41 --:--:--
90095
umount: /tmp/cf: not mounted
mount: special device /dev/mmcblk01 does not exist
mount: special device /dev/mmcblk02 does not exist
 *** depmod 3.18.13-v7+
 *** depmod 3.18.13+
  % Total    % Received % Xferd  Average Speed   Time    Time     Time
 Current
                                 Dload  Upload   Total   Spent    Left
 Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--
  0
100  9823  100  9823    0     0   3661      0  0:00:02  0:00:02 --:--:--
20989
mkdir: cannot create directory `/tmp/cf/boot.bak': File exists
mv: cannot move `/tmp/cf/boot/modules' to `/tmp/cf/boot.bak/modules':
Directory not empty
mv: cannot move `/tmp/cf/boot/overlays' to `/tmp/cf/boot.bak/overlays':
Directory not empty
mv: cannot move `/tmp/cf/boot/vc' to `/tmp/cf/boot.bak/vc': Directory not
empty
umount: /tmp/cf1: not mounted
umount: /tmp/cf: not mounted

Voyage MuBox for RaspBerry Pi installed!
root at debian-dell:/home/sbp#
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.voyage.hk/pipermail/voyage-linux/attachments/20150518/7fab471a/attachment.html>