[Voyage-linux] Raspberry install problems

[Kim-man 'Punky' TSE]

Hi Steen,

Oh, the script does not support mmc device name (e.g. mmcblk0). You need to modify the script to add "p" in between, 
i.e. mmcblk0p1, device and partition.

Sorry on that.  And I welcome patch on this ;-).

Regards,
Punky

On 5/18/2015 9:18 PM, Steen Pedersen wrote:
> Hi
>
> I would like to use Voyage on my Raspberry 2. However, I can't get the install script to work.
> I'm using an Debian 3.2.0-4-686-pae #1 SMP Debian 3.2.65-1+deb7u2 i686 GNU/Linux system.
>
> When I start the mubox-install script I get this output. And nothing is written to the SD-card.
>
> Please help
>
> Steen
>
>
> root at debian-dell:/home/sbp# /home/sbp/Downloads/install-mubox-rpi.sh /dev/mmcblk0
> 1+0 records in
> 1+0 records out
> 512 bytes (512 B) copied, 0.000791931 s, 647 kB/s
> Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
> Building a new DOS disklabel with disk identifier 0xf6f14b8d.
> Changes will remain in memory only, until you decide to write them.
> After that, of course, the previous content won't be recoverable.
>
> Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
>
> Command (m for help): Building a new DOS disklabel with disk identifier 0x7333616f.
> Changes will remain in memory only, until you decide to write them.
> After that, of course, the previous content won't be recoverable.
>
> Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
>
> Command (m for help): Partition type:
>    p   primary (0 primary, 0 extended, 4 free)
>    e   extended
> Select (default p): Partition number (1-4, default 1): First sector (2048-15605759, default 2048): Using default value 
> 2048
> Last sector, +sectors or +size{K,M,G} (2048-15605759, default 15605759):
> Command (m for help): Selected partition 1
> Hex code (type L to list codes): Changed system type of partition 1 to c (W95 FAT32 (LBA))
>
> Command (m for help): Partition type:
>    p   primary (1 primary, 0 extended, 3 free)
>    e   extended
> Select (default p): Partition number (1-4, default 2): First sector (133120-15605759, default 133120): Using default 
> value 133120
> Last sector, +sectors or +size{K,M,G} (133120-15605759, default 15605759): Using default value 15605759
>
> Command (m for help): The partition table has been altered!
>
> Calling ioctl() to re-read partition table.
>
> WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
> The kernel still uses the old table. The new table will be used at
> the next reboot or after you run partprobe(8) or kpartx(8)
>
> WARNING: If you have created or modified any DOS 6.x
> partitions, please see the fdisk manual page for additional
> information.
> Syncing disks.
> mkfs.vfat 3.0.13 (30 Jun 2012)
> /dev/mmcblk01: No such file or directory
> mke2fs 1.42.5 (29-Jul-2012)
> Could not stat /dev/mmcblk02 --- No such file or directory
>
> The device apparently does not exist; did you specify it correctly?
> tune2fs 1.42.5 (29-Jul-2012)
> tune2fs: No such file or directory while trying to open /dev/mmcblk02
> Couldn't find valid filesystem superblock.
>
> Disk /dev/mmcblk0: 7990 MB, 7990149120 bytes
> 4 heads, 16 sectors/track, 243840 cylinders, total 15605760 sectors
> Units = sectors of 1 * 512 = 512 bytes
> Sector size (logical/physical): 512 bytes / 512 bytes
> I/O size (minimum/optimal): 512 bytes / 512 bytes
> Disk identifier: 0x7333616f
>
>         Device Boot      Start         End      Blocks Id  System
> /dev/mmcblk0p1            2048      133119       65536  c  W95 FAT32 (LBA)
> /dev/mmcblk0p2          133120    15605759     7736320 83  Linux
> mount: special device /dev/mmcblk02 does not exist
>   % Total    % Received % Xferd  Average Speed   Time  Time     Time  Current
>                                  Dload  Upload   Total Spent    Left  Speed
> 100 42.1M  100 42.1M    0     0   176k      0  0:04:04  0:04:04 --:--:--  146k
> umount: /tmp/cf: not mounted
> mount: special device /dev/mmcblk02 does not exist
>   % Total    % Received % Xferd  Average Speed   Time  Time     Time  Current
>                                  Dload  Upload   Total Spent    Left  Speed
> 100   168    0   168    0     0    277      0 --:--:-- --:--:-- --:--:--   379
> 100 46.2M  100 46.2M    0     0  83318      0  0:09:41  0:09:41 --:--:-- 90095
> umount: /tmp/cf: not mounted
> mount: special device /dev/mmcblk01 does not exist
> mount: special device /dev/mmcblk02 does not exist
>  *** depmod 3.18.13-v7+
>  *** depmod 3.18.13+
>   % Total    % Received % Xferd  Average Speed   Time  Time     Time  Current
>                                  Dload  Upload   Total Spent    Left  Speed
>   0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
> 100  9823  100  9823    0     0   3661      0  0:00:02  0:00:02 --:--:-- 20989
> mkdir: cannot create directory `/tmp/cf/boot.bak': File exists
> mv: cannot move `/tmp/cf/boot/modules' to `/tmp/cf/boot.bak/modules': Directory not empty
> mv: cannot move `/tmp/cf/boot/overlays' to `/tmp/cf/boot.bak/overlays': Directory not empty
> mv: cannot move `/tmp/cf/boot/vc' to `/tmp/cf/boot.bak/vc': Directory not empty
> umount: /tmp/cf1: not mounted
> umount: /tmp/cf: not mounted
>
> Voyage MuBox for RaspBerry Pi installed!
> root at debian-dell:/home/sbp#
>
>
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux


-- 
Regards,
Kim-man "Punky" Tse

* Open Source Embedded Solutions and Systems
   - Voyage Linux (http://linux.voyage.hk)
   - Voyage MPD   (http://linux.voyage.hk/voyage-mpd)
   - Voyage MuBox (http://mubox.voyage.hk)
* Voyage Store   (http://store.voyage.hk)