[Voyage-linux] Voyage-linux Digest, Vol 96, Issue 6
Adam Mazurkiewicz
(spam-protected)
Thu Dec 6 10:23:31 HKT 2012
Hi,
when I try to install "dpkg -i
somagic-easycap_1.0_amd64.deb<http://code.google.com/p/easycap-somagic-linux/downloads/detail?name=somagic-easycap_1.0_amd64.deb&can=2&q=>
"
I get an error "dpkg: dependency problems prevent configuration of
somagic-easycap:
somagic-easycap depends on libgcrypt11 (>= 1.5.0-0); however:
Version of libgcrypt11 on system is 1.4.5-2."
Do I have bad repositories? I have fresh debian instalation of the version
3.2.17-1.
So how to install libgcrypt11 >= 1.5.0-0?
Thanks
2012/12/5 <voyage-linux-request at list.voyage.hk>
> Send Voyage-linux mailing list submissions to
> voyage-linux at list.voyage.hk
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://list.voyage.hk/mailman/listinfo/voyage-linux
> or, via email, send a message with subject or body 'help' to
> voyage-linux-request at list.voyage.hk
>
> You can reach the person managing the list at
> voyage-linux-owner at list.voyage.hk
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Voyage-linux digest..."
>
>
> Today's Topics:
>
> 1. Re: No sound after reboot Voyage MPD ... (Kim-man 'Punky' TSE)
> 2. Re: Voyage current fails to boot PXE (Roel Huybrechts)
> 3. Re: Voyage current fails to boot PXE (Kim-man 'Punky' TSE)
> 4. Re: No sound after reboot Voyage MPD ... (Andreas Ziegler)
> 5. Nova CPE Krazer Sky Station 5GHz N - CPE Antena Integrada de
> 18dBi e Com Sa?da para Antena Externa (Vendas Krazer Technologies)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 04 Dec 2012 15:25:06 +0800
> From: Kim-man 'Punky' TSE <punkytse at punknix.com>
> To: Vladimir <intueris at gmail.com>
> Cc: voyage-linux at voyage.hk
> Subject: Re: [Voyage-linux] No sound after reboot Voyage MPD ...
> Message-ID: <50BDA552.7010502 at punknix.com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Hi Vladimir,
>
> When you see [off] in the next reboot, please run the following command to
> unmute. Seems to me a known problem in 0.9-rc1.
>
> amixer scontrols | sed -e 's/^Simple mixer control//' | while read line;
> do amixer sset "$line" unmute; done
>
> Regards,
> Punky
>
> On 12/3/2012 11:10 PM, Vladimir wrote:
> > Hi Punky,
> > thanks for the quick reply.
> >
> >
> > After reboot (no sound):
> >
> > root at voyage:~# amixer scontents
> > Simple mixer control 'XMOS Clock Selector',0
> > Capabilities: pvolume pswitch penum
> > Playback channels: Front Left - Front Right
> > Limits: Playback 0 - 127
> > Mono:
> > Front Left: Playback 127 [100%] [0.00dB] [off]
> > Front Right: Playback 127 [100%] [0.00dB] [off]
> > Simple mixer control 'XMOS Clock Selector',1
> > Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
> > Playback channels: Mono
> > Limits: Playback 0 - 127
> > Mono: Playback 127 [100%] [0.00dB] [off]
> >
> > After reconnect USB cable (sound on):
> > root at voyage:~# amixer scontents
> > Simple mixer control 'XMOS Clock Selector',0
> > Capabilities: pvolume pswitch penum
> > Playback channels: Front Left - Front Right
> > Limits: Playback 0 - 127
> > Mono:
> > Front Left: Playback 127 [100%] [0.00dB] [off]
> > Front Right: Playback 127 [100%] [0.00dB] [off]
> > Simple mixer control 'XMOS Clock Selector',1
> > Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
> > Playback channels: Mono
> > Limits: Playback 0 - 127
> > Mono: Playback 127 [100%] [0.00dB] [off]
> >
> >
> > The sound enabled only when reconnect the USB cable.
> >
> >
> >
> > Regards,
> > Vladimir.
> >
> >
> >
> >
> >
> >
> >
> > --
> > View this message in context:
> http://voyage-linux.34677.n3.nabble.com/No-sound-after-reboot-Voyage-MPD-tp4025383p4025387.html
> > Sent from the Voyage Linux mailing list archive at Nabble.com.
> >
> > _______________________________________________
> > Voyage-linux mailing list
> > Voyage-linux at list.voyage.hk
> > http://list.voyage.hk/mailman/listinfo/voyage-linux
>
>
> --
> Regards,
> Kim-man "Punky" Tse
>
> * Open Source Embedded Solutions and Systems
> - Voyage Linux (http://linux.voyage.hk)
> - Voyage ONE (http://linux.voyage.hk/voyage-one)
> - Voyage MPD (http://linux.voyage.hk/voyage-mpd)
> * Voyage Store (http://store.voyage.hk)
>
>
>
>
> ------------------------------
>
> Message: 2
> Date: Tue, 4 Dec 2012 09:33:01 +0100
> From: Roel Huybrechts <lists at rulus.be>
> To: "Christian H." <chrrrr at gmail.com>
> Cc: voyage-linux at voyage.hk
> Subject: Re: [Voyage-linux] Voyage current fails to boot PXE
> Message-ID:
> <CANGu+pQ4A69hU1rJmRqKjTnqP0KL_vif3ffrkLs=
> UwdAcP2nmQ at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hi Christian,
>
> Unfortunately I haven't found a solution to this problem yet. I did some
> testing however and found that a minimally adjusted Debian live build shows
> the same issue, so perhaps this is an upstream problem?
>
> I am eager to find a solution though, because I need the PXE installation
> to install 50+ boards. I'd rather not install them manually. ;) So any
> input in resolving this is welcome.
>
> Kind regards!
>
>
> On Sun, Dec 2, 2012 at 2:36 PM, Christian H. <chrrrr at gmail.com> wrote:
>
> > Hi,
> >
> > just to provide you potentially helpful information - here is what I got
> > using the serial console:
> >
> >
> > PC Engines ALIX.2 v0.99h
> > 640 KB Base Memory
> > 261120 KB Extended Memory
> > Waiting for HDD ...
> >
> > 01F0 Master 044A CF 4GB
> > Phys C/H/S 7769/16/63 Log C/H/S 971/128/63
> >
> > Intel UNDI, PXE-2.0 (build 082)
> > Copyright (C) 1997,1998,1999 Intel Corporation
> > VIA Rhine III Management Adapter v2.43 (2005/12/15)
> >
> > CLIENT MAC ADDR: 00 0D B9 18 AF 90
> > CLIENT IP: 192.168.1.10 MASK: 255.255.255.0 DHCP IP: 192.168.1.200
> > GATEWAY IP: 192.168.1.1
> >
> > PXELINUX 4.05 20120630 Copyright (C) 1994-2011 H. Peter Anvin et al
> >
> >
> ==============================================================================
> > __ __
> > \ \/ /___ __ __ ___ ___ ___
> > \ // _ \\ \/ /,-_ |/ _ |/ -_)
> > \/ \___/ \ / \___,\_ |\___|
> > _/_/ _'_|
> > { V o y a g e } - L i n u x
> > < http://linux.voyage.hk >
> >
> > 1. PXE Boot Voyage Linux with a login shell
> > 2. Start automated install for WRAP (/dev/hda and 38400 serial console)
> > 3. Start automated install for ALIX (/dev/hda and 38400 serial console)
> > 4. Start automated install for 45/48xx (/dev/hda and 19200 serial
> > console)
> > 5. Start automated install for 55xx (/dev/hda and 19200 serial console)
> > 6. Start automated install for gerenic PC (/dev/hda and no serial
> > console)
> >
> >
> >
> ==============================================================================
> > boot: 3
> > Loading linux....
> > Loading initrd.img........ready.
> > [ 0.000000] Linux version 3.4.4-voyage (unknown) (root at punknix-pluto)
> > (gcc ve rsion 4.4.5 (Debian
> > 4.4.5-8) ) #1 SMP PREEMPT Sun Aug 12 12:01:41 HKT 2012
> > [ 0.000000] KERNEL supported cpus:
> > [ 0.000000] Intel GenuineIntel
> > [ 0.000000] AMD AuthenticAMD
> > [ 0.000000] NSC Geode by NSC
> > [ 0.000000] Cyrix CyrixInstead
> > [ 0.000000] Centaur CentaurHauls
> > [ 0.000000] Transmeta GenuineTMx86
> > [ 0.000000] Transmeta TransmetaCPU
> > [ 0.000000] UMC UMC UMC UMC
> > [ 0.000000] BIOS-provided physical RAM map:
> > [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> > [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> > [ 0.000000] BIOS-e820: 0000000000100000 - 0000000010000000 (usable)
> > [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> > [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
> > [ 0.000000] DMI not present or invalid.
> > [ 0.000000] last_pfn = 0x10000 max_arch_pfn = 0x100000
> > [ 0.000000] init_memory_mapping: 0000000000000000-0000000010000000
> > [ 0.000000] RAMDISK: 0fa3b000 - 0ffdf000
> > [ 0.000000] ACPI Error: A valid RSDP was not found
> > (20120320/tbxfroot-219)
> > [ 0.000000] 0MB HIGHMEM available.
> > [ 0.000000] 256MB LOWMEM available.
> > [ 0.000000] mapped low ram: 0 - 10000000
> > [ 0.000000] low ram: 0 - 10000000
> > [ 0.000000] Zone PFN ranges:
> > [ 0.000000] DMA 0x00000010 -> 0x00001000
> > [ 0.000000] Normal 0x00001000 -> 0x00010000
> > [ 0.000000] HighMem empty
> > [ 0.000000] Movable zone start PFN for each node
> > [ 0.000000] Early memory PFN ranges
> > [ 0.000000] 0: 0x00000010 -> 0x000000a0
> > [ 0.000000] 0: 0x00000100 -> 0x00010000
> > [ 0.000000] Using APIC driver default
> > [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
> > [ 0.000000] No local APIC present or hardware disabled
> > [ 0.000000] APIC: disable apic facility
> > [ 0.000000] APIC: switched to apic NOOP
> > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
> > 00000000000f0000
> > [ 0.000000] PM: Registered nosave memory: 00000000000f0000 -
> > 0000000000100000
> > [ 0.000000] Allocating PCI resources starting at 10000000 (gap:
> > 10000000:eff0 0000)
> > [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1
> > nr_node_id s:1
> > [ 0.000000] PERCPU: Embedded 11 pages/cpu @cfff0000 s24256 r0 d20800
> > u45056
> > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
> > Total pag es: 64912
> > [ 0.000000] Kernel command line: initrd=initrd.img autoinstall=alix
> > boot=live netboot=nfs
> > nfsroot=192.168.1.200:/live/image live-getty noautologin all_generi
> > c_ide console=ttyS0,38400n8
> > BOOT_IMAGE=linux
> > [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
> > [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072
> > bytes)
> > [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536
> > bytes)
> > [ 0.000000] Initializing CPU#0
> > [ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
> > [ 0.000000] Memory: 249148k/262144k available (2812k kernel code,
> > 12548k rese rved, 1095k
> data,
> > 344k init, 0k highmem)
> > [ 0.000000] virtual kernel memory layout:
> > [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
> > [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
> > [ 0.000000] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)
> > [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
> > [ 0.000000] .init : 0xc13d1000 - 0xc1427000 ( 344 kB)
> > [ 0.000000] .data : 0xc12bf0a7 - 0xc13d1000 (1095 kB)
> > [ 0.000000] .text : 0xc1000000 - 0xc12bf0a7 (2812 kB)
> > [ 0.000000] Checking if this processor honours the WP bit even in
> > supervisor mode...Ok.
> > [ 0.000000] Preemptible hierarchical RCU implementation.
> > [ 0.000000] NR_IRQS:2304 nr_irqs:256 16
> > [ 0.000000] Console: colour dummy device 80x25
> > [ 0.000000] console [ttyS0] enabled
> > [ 0.000000] Fast TSC calibration using PIT
> > [ 0.000000] Detected 498.072 MHz processor.
> > [ 0.003007] Calibrating delay loop (skipped), value calculated using
> > timer fr equency.. 996.14
> > BogoMIPS (lpj=498072)
> > [ 0.005015] pid_max: default: 32768 minimum: 301
> > [ 0.007338] Mount-cache hash table entries: 512
> > [ 0.010072] SMP alternatives: switching to UP code
> > [ 0.020088] Freeing SMP alternatives: 16k freed
> > [ 0.021185] weird, boot CPU (#0) not listed by the BIOS.
> > [ 0.022013] SMP motherboard not detected.
> > [ 0.023012] Local APIC not detected. Using dummy APIC emulation.
> > [ 0.024010] SMP disabled
> > [ 0.025012] Performance Events: no PMU driver, software events only.
> > [ 0.033035] Brought up 1 CPUs
> > [ 0.034017] Total of 1 processors activated (996.14 BogoMIPS).
> > [ 0.036259] devtmpfs: initialized
> > [ 0.039236] NET: Registered protocol family 16
> > [ 0.047076] PCI: PCI BIOS revision 2.10 entry at 0xfced9, last bus=0
> > [ 0.048017] PCI: Using configuration type 1 for base access
> > [ 0.071673] bio: create slab <bio-0> at 0
> > [ 0.073562] ACPI: Interpreter disabled.
> > [ 0.074708] vgaarb: loaded
> > [ 0.077218] SCSI subsystem initialized
> > [ 0.079467] PCI: Probing PCI hardware
> > [ 0.080350] PCI host bridge to bus 0000:00
> > [ 0.081053] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
> > [ 0.082034] pci_bus 0000:00: root bus resource [mem
> > 0x00000000-0xffffffff]
> > [ 0.093300] Switching to clocksource pit
> > [ 0.094533] pnp: PnP ACPI: disabled
> > [ 0.120648] NET: Registered protocol family 2
> > [ 0.122244] IP route cache hash table entries: 2048 (order: 1, 8192
> > bytes)
> > [ 0.123933] TCP established hash table entries: 8192 (order: 4, 65536
> > bytes)
> > [ 0.125303] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
> > [ 0.126894] TCP: Hash tables configured (established 8192 bind 8192)
> > [ 0.127973] TCP: reno registered
> > [ 0.129702] UDP hash table entries: 128 (order: 0, 4096 bytes)
> > [ 0.130254] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
> > [ 0.131499] NET: Registered protocol family 1
> > [ 0.133170] RPC: Registered named UNIX socket transport module.
> > [ 0.133972] RPC: Registered udp transport module.
> > [ 0.135133] RPC: Registered tcp transport module.
> > [ 0.136280] RPC: Registered tcp NFSv4.1 backchannel transport module.
> > [ 0.138294] Trying to unpack rootfs image as initramfs...
> > [ 1.532559] Freeing initrd memory: 5776k freed
> > [ 1.539788] platform rtc_cmos: registered platform RTC device (no PNP
> > device found)
> > [ 1.542358] microcode: AMD CPU family 0x5 not supported
> > [ 1.545789] alix: system is recognized as "PC Engines ALIX.2 v0.99h"
> > [ 1.552732] NFS: Registering the id_resolver key type
> > [ 1.554666] msgmni has been set to 497
> > [ 1.557569] Block layer SCSI generic (bsg) driver version 0.4 loaded
> > (major 254)
> > [ 1.557817] io scheduler noop registered
> > [ 1.559689] io scheduler deadline registered
> > [ 1.561770] io scheduler cfq registered (default)
> > [ 1.726777] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> > [ 1.729059] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
> > [ 1.731121] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
> > [ 1.734011] Linux agpgart interface v0.103
> > [ 1.750526] brd: module loaded
> > [ 1.750848] ACPI Exception: AE_BAD_PARAMETER, Thread 3477265344 could
> > not acquire Mutex [0x1] (20120320/utmutex-276)
> > [ 1.753924] ACPI Exception: AE_BAD_PARAMETER, Thread 3477265344 could
> > not acquire Mutex [0x1] (20120320/utmutex-276)
> > [ 1.756974] cs5535-gpio cs5535-gpio: reserved resource region [io
> > 0x6100-0x61ff]
> > [ 1.758784] gpiochip_add: registered GPIOs 0 to 31 on device:
> > cs5535-gpio
> > [ 1.760211] ACPI Exception: AE_BAD_PARAMETER, Thread 3477265344 could
> > not acquire Mutex [0x1] (20120320/utmutex-276)
> > [ 1.763232] ACPI Exception: AE_BAD_PARAMETER, Thread 3477265344 could
> > not acquire Mutex [0x1] (20120320/utmutex-276)
> > [ 1.766285] ACPI Exception: AE_BAD_PARAMETER, Thread 3477265344 could
> > not acquire Mutex [0x1] (20120320/utmutex-276)
> > [ 1.769360] cs5535-mfd 0000:00:0f.0: 5 devices registered.
> > [ 1.770083] Uniform Multi-Platform E-IDE driver
> > [ 1.771220] ide-gd driver 1.18
> > [ 1.774113] i8042: PNP: No PS/2 controller found. Probing ports
> > directly.
> > [ 1.776520] i8042: No controller found
> > [ 1.777456] mousedev: PS/2 mouse device common for all mice
> > [ 1.778902] cpuidle: using governor ladder
> > [ 1.780261] cpuidle: using governor menu
> > [ 1.783528] TCP: cubic registered
> > [ 1.784565] NET: Registered protocol family 17
> > [ 1.785022] Registering the dns_resolver key type
> > [ 1.786636] Using IPI No-Shortcut mode
> > [ 1.790976] Freeing unused kernel memory: 344k freed
> > [ 1.792948] Write protecting the kernel text: 2816k
> > [ 1.793829] Write protecting the kernel read-only data: 908k
> > Loading, please wait...
> > [ 1.863483] scsi0 : ata_generic
> > [ 1.864923] scsi1 : ata_generic
> > [ 1.867024] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00
> > irq 14
> > [ 1.867954] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08
> > irq 15
> > [ 2.022972] ata1.00: CFA: CF 4GB, 20080820, max UDMA/66
> > [ 2.023679] ata1.00: 7831152 sectors, multi 0: LBA
> > [ 2.025346] ata1.00: configured for UDMA/66
> > [ 2.037105] scsi 0:0:0:0: Direct-Access ATA CF 4GB
> > 2008 PQ: 0 ANSI: 5
> > [ 2.039821] sd 0:0:0:0: [sda] 7831152 512-byte logical blocks: (4.00
> > GB/3.73 GiB)
> > [ 2.041674] sd 0:0:0:0: [sda] Write Protect is off
> > [ 2.043290] sd 0:0:0:0: [sda] Write cache: disabled, read cache:
> > enabled, doesn't support DPO or FUA
> > [ 2.539550] Switching to clocksource tsc
> >
> >
> >
> > Best regards
> > Christian
> > _______________________________________________
> > Voyage-linux mailing list
> > Voyage-linux at list.voyage.hk
> > http://list.voyage.hk/mailman/listinfo/voyage-linux
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://list.voyage.hk/pipermail/voyage-linux/attachments/20121204/290cf761/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 3
> Date: Tue, 04 Dec 2012 17:26:53 +0800
> From: Kim-man 'Punky' TSE <punkytse at punknix.com>
> To: Roel Huybrechts <lists at rulus.be>
> Cc: voyage-linux at voyage.hk
> Subject: Re: [Voyage-linux] Voyage current fails to boot PXE
> Message-ID: <50BDC1DD.2060705 at punknix.com>
> Content-Type: text/plain; charset=UTF-8; format=flowed
>
> Hi all,
>
> Try adding "ethdevice=eth0" to APPEND lines in
> /tftpboot/pxelinux.cfg/default
>
> - APPEND initrd=initrd.img boot=live netboot=nfs nfsroot=192.168.1.200:/live/image
> live-getty noautologin
> all_generic_ide debug console=ttyS0,9600n8
> + APPEND initrd=initrd.img boot=live netboot=nfs nfsroot=192.168.1.200:/live/image
> ethdevice=eth0 live-getty
> noautologin all_generic_ide debug console=ttyS0,9600n8
>
>
> On 12/4/2012 4:33 PM, Roel Huybrechts wrote:
> > Hi Christian,
> >
> > Unfortunately I haven't found a solution to this problem yet. I did some
> testing however and found that a minimally
> > adjusted Debian live build shows the same issue, so perhaps this is an
> upstream problem?
> >
> > I am eager to find a solution though, because I need the PXE
> installation to install 50+ boards. I'd rather not
> > install them manually. ;) So any input in resolving this is welcome.
> >
> > Kind regards!
> >
>
> --
> Regards,
> Kim-man "Punky" Tse
>
> * Open Source Embedded Solutions and Systems
> - Voyage Linux (http://linux.voyage.hk)
> - Voyage ONE (http://linux.voyage.hk/voyage-one)
> - Voyage MPD (http://linux.voyage.hk/voyage-mpd)
> * Voyage Store (http://store.voyage.hk)
>
>
>
>
> ------------------------------
>
> Message: 4
> Date: Tue, 04 Dec 2012 11:15:23 +0100
> From: Andreas Ziegler <az0111 at aeolio.de>
> To: voyage-linux at voyage.hk
> Subject: Re: [Voyage-linux] No sound after reboot Voyage MPD ...
> Message-ID: <50BDCD3B.3030901 at aeolio.de>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Hi Vladimir,
> Hi Punky,
>
> On 04.12.2012 05:00, voyage-linux-request at list.voyage.hk wrote:
> > Simple mixer control 'XMOS Clock Selector',0
> > Capabilities: pvolume pswitch penum
> > Playback channels: Front Left - Front Right
> > Limits: Playback 0 - 127
> > Mono:
> > Front Left: Playback 127 [100%] [0.00dB] [off]
> > Front Right: Playback 127 [100%] [0.00dB] [off]
>
> I think this is a 'feature' of XMOS based receiver boards; mine reacts
> in the same way. I placed these commands
>
> amixer -c 0 sset 'XMOS Clock Selector',0 100% unmute
> amixer -c 0 sset 'XMOS Clock Selector',1 100% unmute
>
> in /etc/rc.local.
>
> Punky's script is cooler. Just replace the control name with yours.
>
> Regards,
> Andreas
>
>
>
> ------------------------------
>
> Message: 5
> Date: Tue, 04 Dec 2012 00:13:09 -0200
> From: "Vendas Krazer Technologies" <evendas at krazer.com.br>
> To: <voyage-linux at voyage.hk>
> Subject: [Voyage-linux] Nova CPE Krazer Sky Station 5GHz N - CPE
> Antena Integrada de 18dBi e Com Sa?da para Antena Externa
> Message-ID: <2478FE00.1CDD1B4 at krazer>
> Content-Type: text/plain; charset="utf-8"
>
> Lan?amento
>
> CPE Krazer Sky Station 5GHz N
>
> Voc? cliente pediu que a Krazer fizesse uma nova CPE num formato mais
> estiloso, pequena, de menor tamanho e que tivesse novas funcionabilidade,
> mais especificamente acesso f?cil ao bot?o de reset, prote??o contra queima
> e a t?o desejada SA?DA PARA ANTENA EXTERNA!!!
>
> R$ 179.90
>
>
>
> Antena Integrada de 18dBi 60?
>
> Duas Portas de Rede Lan e Wan
>
> PA Real de 630mW e LNA Ultra Ganho
> PoE Passivo com Prote??o Dupla de 12 a 24V
> Fonte Chaveada 12V Full Range 110 a 220V
> Exclusiva Sa?da para Antena Externa
>
> Homologa??o Anatel 0269-11-5280
>
> Instala??o R?pida e Simples.
> Software Amigavel e em Portugu?s!
> Suporte a PPPoE Wisp Cliente!
> Controle de Banda!
>
>
>
> Excelente sinal de recep??o! Longa Dist?ncia!
>
>
> Fa?a um teste em sua rede e compare com os concorrentes, muito mais sinal
> que UBNT, muito mais dados, transmiss?o de quase 90Mbps TCP/IP
> continuamente! Lat?ncia de rede de 1 a 5 ms com carga completa!
>
> Contate-nos
> Val Campos // Carla Maria // Eder Roberto
>
> Email / MSN:
> vendas at allearth.com.br
>
>
> Vendas / SAC
> (19) 3256-5557
> (19) 3245-0708
> www.krazer.com.br
>
>
> Envio de Email n?o autorizado ? crime, n?o seja o vil?o da hist?ria! Email
> ? protegido sobre sigilo fiscal e federal. Lei Federal Brasil.
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://list.voyage.hk/pipermail/voyage-linux/attachments/20121204/ff41fe07/attachment-0001.html
> >
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: cpe-krazer-station-5-n.jpeg
> Type: image/jpeg
> Size: 8183 bytes
> Desc: not available
> URL: <
> http://list.voyage.hk/pipermail/voyage-linux/attachments/20121204/ff41fe07/attachment-0001.jpeg
> >
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux
>
>
> ------------------------------
>
> End of Voyage-linux Digest, Vol 96, Issue 6
> *******************************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.voyage.hk/pipermail/voyage-linux/attachments/20121206/3a04a4de/attachment.html>
More information about the Voyage-linux
mailing list