[Voyage-linux] Stratum 1 NTP server

[Jon Meek]

Here is a good reference for the 4501 as a Stratum 1 NTP server:

http://c59951.r51.cf2.rackcdn.com/5348-160-vandrunen.pdf


I am currently testing the Raspberry Pi as a Stratum 1 NTP server based on
work by others, and will also try to implement it on a PC Engines ALIX
board.

Jon



On Sun, Jun 23, 2013 at 5:13 PM, Jaap Winius <jwinius at umrk.nl> wrote:

> Hi folks,
>
> Recently I installed Voyage Linux 0.9.1 on my Soekris net4501. I'd like
> to use it as a dedicated stratum 1 NTP server with gpsd and a GPS
> receiver attached to the serial port. However, although it does receive
> the NMEA data, there seems to be no PPS signal. Moreover, even as a
> stratum 2 server its offset and latency times are terrible, e.g. 2500 and
> 800 ms respectively.
>
> Would anyone have an idea about what might be causing behavior this and
> maybe how to fix it?
>
> Thanks,
>
> Jaap
>
>
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.voyage.hk/pipermail/voyage-linux/attachments/20130624/9ea0613a/attachment.html>